Technical specification
Floor trunking 74 in 
Description
Use
- Floor surface mount that allows to manage and protect the cable laying between the fixed installation and the working station.
- Helps maintain the working area organized and free of obstacles for the circulation of people and objects.
- Fixed compartmentalization for the separation and protection of the different circuits.
- Suitable for wet floor treatment.
- Suitable for use with Unex Service pole 50.
- Suitable for indoor use.
Installation
- Length: 2 m.
- Removable protective film preserves the product features during transport and handling.
- Clip-on mounting system. Removable only with a tool.
- Base with adhesive tape on both ends that allows quick pre-assembly and 2 lines of drill holes every 200 mm for a faster assembly.
Design
- Colour: Anthracite.
- Good scratch resistance and behaviour against dirt. No coatings.
- Curved cover to avoid people from falling and to facilitate the passage of objects.
Mounting instructions
- To fulfill the characteristics defined herein, the installation must be carried out in accordance with the manufacturer's assembly instructions provided in the main product packaging and also available on the website www.unex.net.
Characteristics of Trunking system
|
Raw Material
|
|
|---|---|
|
Floor trunking
|
U48X (See technical data for raw material).
|
|
Applications
|
|
|---|---|
|
Applications
|
Trunking system for indoor installations.
|
|
Contenido de silicona
|
|
|---|---|
|
Silicone free(1)
|
<0,01%
|
|
Directiva 2011/65/EU
|
|
|---|---|
|
RoHS II Compliant
|
Compliant.
|
|
EN 50085-2-2:2008
|
|
|---|---|
|
Minimum storage and transport temperature
|
-45ºC
|
|
Minimum installation and application temperature
|
-5ºC
|
|
Maximum application temperature
|
+60ºC
|
|
Resistance to impacts during mounting and use
|
2 J at -5ºC
|
|
Resistance to flame propagation
|
Non-flame propagation.
|
|
Electrical continuity characteristic
|
Without electrical continuity characteristic.
|
|
Electrical insulating characteristic
|
With electrical insulating characteristic.
|
|
Protection degree assured by the enclosure
|
IP3X.
|
|
Retention of the system access cover
|
Cover removable only with the aid of a tool.
|
|
Electrically protective separation
|
With internal protective separation.
|
|
According to floor treatment(2)
|
For wet-treatment of floor.
|
|
Rated Voltage
|
750 V
|
|
Resistance to a vertical load
applied through a little surface |
|
|
Resistance to a vertical load
applied through a big surface |
5.000 N
|
|
Protection against mechanical damage(3)
|
IK08
|
|
EN 60695-2-11:2001
|
|
|---|---|
|
Glow-wire test
|
Severity degree: 960ºC
|
Characteristics of Trunking system
Raw Material
Floor trunking:
U48X (See technical data for raw material).
Applications
Applications:
Trunking system for indoor installations.
Contenido de silicona
Silicone free:(1)
<0,01%
Directiva 2011/65/EU
RoHS II Compliant:
Compliant.
EN 50085-2-2:2008
Minimum storage and transport temperature:
-45ºC
Minimum installation and application temperature:
-5ºC
Maximum application temperature:
+60ºC
Resistance to impacts during mounting and use:
2 J at -5ºC
Resistance to flame propagation:
Non-flame propagation.
Electrical continuity characteristic:
Without electrical continuity characteristic.
Electrical insulating characteristic:
With electrical insulating characteristic.
Protection degree assured by the enclosure:
IP3X.
Retention of the system access cover:
Cover removable only with the aid of a tool.
Electrically protective separation:
With internal protective separation.
According to floor treatment:(2)
For wet-treatment of floor.
Rated Voltage:
750 V
Resistance to a vertical load
applied through a little surface:
applied through a little surface:
- 1.500 N (74010-45)
- 2.000 N (74030-45)
Resistance to a vertical load
applied through a big surface:
applied through a big surface:
5.000 N
Protection against mechanical damage:(3)
IK08
EN 60695-2-11:2001
Glow-wire test:
Severity degree: 960ºC
Compulsory regulations
|
European Directive 2014/35/EU
|
|
|---|---|
|
CE Marking
|
Conformity with standard EN 50085-2-2:2008.
|
Compulsory regulations
European Directive 2014/35/EU
CE Marking:
Conformity with standard EN 50085-2-2:2008.
Characteristics of U48X raw material
- Base raw material: 100% recycled halogen free thermoplastic component (4)
- Halogen contents according to EN 50642: 2018: Halogen free
- Silicone contents: <0,01% (5)
- Phthalate contents according to ASTM D2124-99:2004: <0,01% (5)
- Dielectric strength according to IEC 60243-1:2013:
18±5 kV/mm
Test sample thickness 2,0 mm. - Dielectric strength according to IEC 60243-1:2013:
14±5 kV/mm
Test sample thickness 2,5 mm. - Reaction to fire according to NF F 16-101:1998: Class F2
- UL flammability tests on plastic materials according to ANSI/UL 94: 1990:
Degree UL94: V0
Test sample thickness 3,2 mm - L.O.I. Oxygen index according to EN ISO 4589:1999:
(Concentration %) =32±3
Test sample thickness 3,2 mm - Coefficient of linear expansion: 0,07 mm/°C m. (6)
- Behaviour to chemicals exposure:
It is resistant to the majority of:
- Oils (mineral, vegetable and paraffins)
- Diluted acids
- Fatty acids
- Alcohols
- Carbonates, Phosphates, Nitrates, Sulphates and other saline solutions
- Aliphatic hydrocarbons
- Diluted hydroxides
However, it is not resistant to the majority of:
- Amines
- Ketones
- Phenols
- Aromatic hydrocarbons (6)
Notes
1. The self-adhesive tape protector contains silicone. Once removed, the silicone content is < 0.01%
2. Assembly using cable with cover. Connections to active parts must be placed 10 mm above the ground.
3. The adhesive is for the pre-installation and does not replace the use of other fastening systems such as wall plugs and screws to guarantee adequate hold and comply with the requirements of standard EN 50085-2-2
4. Value corresponding to the last 5 years, subject to availability.
5. Detection limit for the analytical technique applied.
6. All features marked are based on random tests of the material in the manufacture of our products. However, they only reflect the values accepted by the raw material manufacturers, which are provided only as information and guidance.
03/05/2024
Our quality management system complies with the requirements of UNE-EN ISO ISO 9001:2015 for the design, production and commercialization of Unex Systems.
+34 619 715 627Our quality management system complies with the requirements of UNE-EN ISO ISO 9001:2015 for the design, production and commercialization of Unex Systems.
+34 619 715 627