Logo Unex
Cable tie wall plug (flush) 25 in LMP

Technical specification

Cable tie wall plug (flush) 25 in Logo

Logo Unex

Description

Use

  • For tying of cables and conduits.
  • Compatible with cable ties 22 width 3,6mm., 4,8mm. y 7,6mm in indoor and outdoor installations.
  • It is recommended to keep the bag closed until use.
  • Colour: Grey RAL 7035.

Installation

  • Hand thread, easier mounting at site.
  • For hard and soft walls. No screews needed.
  • Only two pieces for each fixing.
  • One size of cable ties for several cable or conduit diameters.
  • Good resistance to extraction.
  • Good outdoor performance and resistance to corrosion.
  • Insulating material, halogen free.

Product characteristics

  • Plug, grey colour for indoor installations: U64X
  • RoHS Compliant: Conformity(1)
  • Silicone contents: Silicone free (< 0,01%)

Quality Marks(2)

EN 62275:2019
Licence nº: 030/002292

EN 62275:2019
Licence nº: NF004_1005/A3

EN 62275:2019
Licence nº:40012853

GOST R IEC 62275:2015
POCC ES.AM05.H10276

Characteristics

EN 62275:2019
Material
Non metallic
Temperatura mínima de montaje
-15ºC.
Temperatura mín./max. de instalación y aplicación
-40ºC a +60ºC
Resistencia UV
Not declared.
Declared mechanical strength
  • Ref. 1251-3: 4,0Kg
  • Ref.1252-3: 3,4Kg

Characteristics

EN 62275:2019

Material:
Non metallic
Temperatura mínima de montaje:
-15ºC.
Temperatura mín./max. de instalación y aplicación:
-40ºC a +60ºC
Resistencia UV:
Not declared.
Declared mechanical strength:
  • Ref. 1251-3: 4,0Kg
  • Ref.1252-3: 3,4Kg

Compulsory regulations

Directiva de Baja Tensión 2014/35/EU
CE Marking
Conformidad con la norma EN 62275:2019.

Compulsory regulations

Directiva de Baja Tensión 2014/35/EU

CE Marking:
Conformidad con la norma EN 62275:2019.

Characteristics of U64X raw material

  • Base raw material: Polyamide 6
  • Halogen contents according to EN 50642: 2018: Halogen free
  • Silicone contents: <0,01% (3)
  • Phatalate contents according to ASTM D2124-99:2004: <0,01% (3)
  • UL flammability tests on plastic materials according to ANSI/UL 94: 1990: degree UL94 HB

Notes

1. See updated information of each part number on www.unex.net

2. Except for new part numbers, which are under process of obtaining quality marks and approvals. See updated information of each part number on www.unex.net

3. Detection limit for the analytical technique applied.

27/12/2022