Logo Unex
Floor box 52 in LMP

Technical specification

Floor box 52 in Logo

Logo Unex

Description

Use

  • Possibility to reserve spare access units protected by a waterproof lid.
  • Versatile configuration of workstations with possibility to combine with Service post 50 or Furniture supply 51.
  • Connection box fixed on the floor structure, embedded in the levelling layer and flushed in the pavement.
  • Outlets are insulated, separated and kept apart from the floor increasing security and providing user's accessibility.

Design

  • Small sizes of watertight cover in SST which can be flush mounted in the pavement
  • Floor box distribution throughout the floor, drawing a wire mesh integrated into the working space

Installation

  • Unex Floor box 50 can be mounted on any kind of surface: newly built floor, refurbishing, supply from the lower floor, embedded or on concrete structures, and with all kinds of finishing: ceramics, tile, marble, wood, carpet, etc.
  • High box: 160mm. The floor box can be easily cut at the required height.
  • Minimum floor thickness of 40mm
  • Possible supply from Unex trunking 73 sizes 30x60, 40x60, 40x90 mm or tube up to 40 mm diameter.
  • Protective lid to assure perfect condition at the end of construction.
  • Insulating box.Earthing not required.
  • Clean and safe system. Watertight connections.

Mounting instructions

  • To fulfil the characteristics defined herein, the installation must be carried out in accordance with the manufacturer`s assembly instructions provided in the main product packaging and are also available on the website www.unex.net.

Quality Marks(1)

ГOCT P 61084-1:2007 (GOST R 61084-1:2007)
POCC ES.AM05.H09265

Characteristics

Raw material
Watertight lid
Stainless steel
Floor box
U24X (See technical data for raw material).
Applications
Applications
Indoor installations.
Silicone contents
Silicone free
<0,01%
Directive 2011/65/EU
RoHS II Compliant
Compliant.
EN 50085-2-2:2008
Minimum storage and transport temperature
-45ºC
Minimum installation and application temperature
-5ºC
Maximum application temperature
+60ºC
Resistance to flame propagation
Non-flame propagation.
Electrical continuity characteristic
Without electrical continuity characteristic.
Electrical insulating characteristic
With electrical insulating characteristic.
Protection degree assured by the enclosure
IP4X.
Retention of the system access cover
Cover removable only with the aid of a tool.
Resistance against mechanical impacts during mounting and use
2 J at -5ºC
Electrically protective separation
With internal protective separation.
According to floor treatment
Floor box for wet-treatment of floor
According to resistance to vertical load applied through small surface area
2.500 N
According to resistance to vertical load applied through large surface area
5.000 N
Intended installation positions
Flushed in the pavement.
Rated Voltage
750 V
Protection against mechanical damage
IK07
EN 60695-2-11:2001
Glow-wire test
Severity degree: 960ºC

Characteristics

Raw material

Watertight lid:
Stainless steel
Floor box:
U24X (See technical data for raw material).

Applications

Applications:
Indoor installations.

Silicone contents

Silicone free:
<0,01%

Directive 2011/65/EU

RoHS II Compliant:
Compliant.

EN 50085-2-2:2008

Minimum storage and transport temperature:
-45ºC
Minimum installation and application temperature:
-5ºC
Maximum application temperature:
+60ºC
Resistance to flame propagation:
Non-flame propagation.
Electrical continuity characteristic:
Without electrical continuity characteristic.
Electrical insulating characteristic:
With electrical insulating characteristic.
Protection degree assured by the enclosure:
IP4X.
Retention of the system access cover:
Cover removable only with the aid of a tool.
Resistance against mechanical impacts during mounting and use:
2 J at -5ºC
Electrically protective separation:
With internal protective separation.
According to floor treatment:
Floor box for wet-treatment of floor
According to resistance to vertical load applied through small surface area:
2.500 N
According to resistance to vertical load applied through large surface area:
5.000 N
Intended installation positions:
Flushed in the pavement.
Rated Voltage:
750 V
Protection against mechanical damage:
IK07

EN 60695-2-11:2001

Glow-wire test:
Severity degree: 960ºC

Compulsory regulations

European Directive 2014/35/EU
CE Marking
Conformity with standard EN 50085-2-2:2008.

Compulsory regulations

European Directive 2014/35/EU

CE Marking:
Conformity with standard EN 50085-2-2:2008.

Characteristics of U24X raw material

  • Base raw material: PVC.
  • Silicone contents: <0,01%. (2)
  • Phthalate contents according to ASTM D2124-99:2004: <0,01%. (2)
  • Dielectric strength: Insulating.
  • Reaction to fire s/UNE 201010:2015: Classification: M1
  • UL flammability tests on plastic materials according to ANSI/UL 94: 1990: Degree UL94: V0.

Notes

1. Except for new part numbers, which are under process of obtaining quality marks and approvals. See updated information of each part number on www.unex.net

2. Detection limit for the analytical technique applied.

03/05/2024