Trunkings 93 in LMP halogen free

Technical specification

Trunkings 93 in Logo halogen free

Logo Unex

Description

Use

  • Internal cover designed for mounting of switches and sockets.
  • Unex trunkings are designed for mounting on the wall or flush-mounted on brick walls or plasterboard, partitions, wooden linings,etc.
  • Fixed compartments, with independent lids and possible sub-divisions with a removable divider that allows to separate and protect the circuits of different services.

Design

  • Colour: White, Aluminum
  • The trunking rigidity absorbs the irregularities of the wall.
  • It can be installed as a skirting board by following the installation instructions.

Installation

  • Fittings in two pieces offering the possibility to mount the most common switches and socketsassuring a solid fixing.
  • Internal lid and fittings are pressured mounted. Removable only with the aid of a tool.
  • Protective film. Ensures that the product remains in perfect conditions during transport and application.
  • 2m length. Easy transportation.
  • Perforated base every 250mm for a faster assembly.

Mounting instructions

  • To fulfil the characteristics defined herein, the installation must be carried out in accordance with the manufacturer`s assembly instructions provided in the main product packaging and are also available on the website www.unex.net.

Quality Marks(1)

EN 50085-2-1:2006 + A1:2011
Licence nº: NF004_1172/M1

Characteristics of Trunking system

Raw material
Trunkings and fittings
U48X (See technical data for raw material).
Accessories
U42X / U43X (See technical data for raw material).
Applications
Applications
Indoor installations.
Silicone contents
Silicone free
<0,01%
Directive 2011/65/EU
RoHS II Compliant
Compliant.
EN 50085-2-1:2006 + A1:2011
Minimum storage and transport temperature
-45ºC
Minimum installation and application temperature
-25ºC
Maximum application temperature
+90ºC
Resistance against mechanical impacts during mounting and use
  • Trunkings: 5 J at -25ºC.
  • Fittings: 2 J at -25ºC.
Resistance to flame propagation
Non-flame propagation.
Electrical continuity characteristic
Without electrical continuity characteristic.
Electrical insulating characteristic
With electrical insulating characteristic.
Protection degree assured by the enclosure
IP4X. Mounted on wall.
Retention of the system access cover
Cover removable only with the aid of a tool.
Electrically protective separation
With internal protective separation.
Intended installation positions
  • Flush mounted on the wall.
  • Semi flush or surface mounted on the wall.
  • Wall fixed and supported by a horizontal surface other than the floor.
Prevention of contact with liquids
Not declared.
Type
Type 3.
Rated Voltage
750 V
Degrees of protection provided by enclosures against external mechanical impacts.(2)
  • IK08 Type 3.
  • • White: IK10 Type 1.
  • • Aluminum: IK09 Type 1.
Fixing for apparatus mounting of socket outlets
Resistance to extraction of 81 N
EN 60695-2-11:2001
Glow-wire test
Severity degree: 960ºC.

Characteristics of Trunking system

Raw material

Trunkings and fittings:
U48X (See technical data for raw material).
Accessories:
U42X / U43X (See technical data for raw material).

Applications

Applications:
Indoor installations.

Silicone contents

Silicone free:
<0,01%

Directive 2011/65/EU

RoHS II Compliant:
Compliant.

EN 50085-2-1:2006 + A1:2011

Minimum storage and transport temperature:
-45ºC
Minimum installation and application temperature:
-25ºC
Maximum application temperature:
+90ºC
Resistance against mechanical impacts during mounting and use:
  • Trunkings: 5 J at -25ºC.
  • Fittings: 2 J at -25ºC.
Resistance to flame propagation:
Non-flame propagation.
Electrical continuity characteristic:
Without electrical continuity characteristic.
Electrical insulating characteristic:
With electrical insulating characteristic.
Protection degree assured by the enclosure:
IP4X. Mounted on wall.
Retention of the system access cover:
Cover removable only with the aid of a tool.
Electrically protective separation:
With internal protective separation.
Intended installation positions:
  • Flush mounted on the wall.
  • Semi flush or surface mounted on the wall.
  • Wall fixed and supported by a horizontal surface other than the floor.
Prevention of contact with liquids:
Not declared.
Type:
Type 3.
Rated Voltage:
750 V
Degrees of protection provided by enclosures against external mechanical impacts.:(2)
  • IK08 Type 3.
  • • White: IK10 Type 1.
  • • Aluminum: IK09 Type 1.
Fixing for apparatus mounting of socket outlets:
Resistance to extraction of 81 N

EN 60695-2-11:2001

Glow-wire test:
Severity degree: 960ºC.

Compulsory regulations

European Directive 2014/35/EU
CE Marking
Conformity with standard EN 50085-2-1:2006+A1:2011.

Compulsory regulations

European Directive 2014/35/EU

CE Marking:
Conformity with standard EN 50085-2-1:2006+A1:2011.

Characteristics of U48X raw material

  • Base raw material: 100% recycled halogen free thermoplastic component (3, 4)
  • Halogen contents according to EN IEC 63355: 2023: Halogen free
  • Silicone contents: <0,01% (5)
  • Phthalate contents according to ASTM D2124-99:2004: <0,01% (5)
  • Dielectric strength according to IEC 60243-1:2013: 18±5 kV/mm
    Test sample thickness 2,0 mm.
  • Reaction to fire according to NF F 16-101:1998: Class F2
  • UL flammability tests on plastic materials according to ANSI/UL 94: 1990: Degree UL94: V0
    Test sample thickness 3,2 mm
  • L.O.I. Oxygen index according to EN ISO 4589:1999: (Concentration %) =32±3
    Test sample thickness 3,2 mm
  • Coefficient of linear expansion: 0,07 mm/°C m. (6)

Characteristics of U43X raw material

  • Base raw material: 100% recycled halogen free thermoplastic component (3)
  • Halogen contents according to EN 50642: 2018: Halogen free
  • Silicone contents: <0,01% (5)
  • Phthalate contents according to ASTM D2124-99:2004: <0,01% (5)
  • Dielectric strength according to IEC 60243-1:2013: 18±5 kV/mm
    Test sample thickness 2,9 mm.
  • Classification of the reaction to fire according to NF F 16-101:1988: <= Class F2
  • UL flammability tests on plastic materials according to ANSI/UL 94: 1990: degree UL94 V0
  • L.O.I. Oxygen index according to EN ISO 4589:1999+A1:2006: >=34

Notes

1. Except for new part numbers, which are under process of obtaining quality marks and approvals. See updated information of each part number on www.unex.net

2. Excepting references 93749-42, 93750-42, 93751-42, 93752-42, 93749-43, 93750-43, 93751-43, 93752-43 that are K07.

3. Value corresponding to the last 5 years, subject to availability.

4. Excepting references93749-42, 93750-42, 93751-42, 93752-42, 93852-42, 93854-42, 93856-42, 93749-43, 93750-43, 93751-43, 93752-43, 93852-43, 93854-43, 93856-43

5. Detection limit for the analytical technique applied.

6. All features marked are based on random tests of the material in the manufacture of our products. However, they only reflect the values accepted by the raw material manufacturers, which are provided only as information and guidance.

23/10/2026 13:39:49