Raw Material
|
|
---|---|
Floor trunking
|
U48X (See technical data for raw material).
|
Applications
|
|
---|---|
Applications
|
Trunking system for indoor installations.
|
Contenido de silicona
|
|
---|---|
Silicone free(1)
|
<0,01%
|
Directiva 2011/65/EU
|
|
---|---|
RoHS II Compliant
|
Compliant.
|
EN 50085-2-2:2008
|
|
---|---|
Minimum storage and transport temperature
|
-45ºC
|
Minimum installation and application temperature
|
-5ºC
|
Maximum application temperature
|
+60ºC
|
Resistance to impacts during mounting and use
|
2 J at -5ºC
|
Resistance to flame propagation
|
Non-flame propagation.
|
Electrical continuity characteristic
|
Without electrical continuity characteristic.
|
Electrical insulating characteristic
|
With electrical insulating characteristic.
|
Protection degree assured by the enclosure
|
IP3X.
|
Retention of the system access cover
|
Cover removable only with the aid of a tool.
|
Electrically protective separation
|
With internal protective separation.
|
According to floor treatment(2)
|
For wet-treatment of floor.
|
Rated Voltage
|
750 V
|
Resistance to a vertical load
applied through a little surface |
|
Resistance to a vertical load
applied through a big surface |
5.000 N
|
Protection against mechanical damage(3)
|
IK08
|
EN 60695-2-11:2001
|
|
---|---|
Glow-wire test
|
Severity degree: 960ºC
|
European Directive 2014/35/EU
|
|
---|---|
CE Marking
|
Conformity with standard EN 50085-2-2:2008.
|
1. The self-adhesive tape protector contains silicone. Once removed, the silicone content is < 0.01%
2. Assembly using cable with cover. Connections to active parts must be placed 10 mm above the ground.
3. The adhesive is for the pre-installation and does not replace the use of other fastening systems such as wall plugs and screws to guarantee adequate hold and comply with the requirements of standard EN 50085-2-2
4. Value corresponding to the last 5 years, subject to availability.
5. Detection limit for the analytical technique applied.
6. All features marked are based on random tests of the material in the manufacture of our products. However, they only reflect the values accepted by the raw material manufacturers, which are provided only as information and guidance.