|
|
---|---|
Service temperature
|
|
Installation temperature
|
Adjustable markerts and sleeves: -40ºC to +60ºC (1853: -5ºC to +60ºC)
|
Minimum installation temperature
|
Lable-holder and Marker plates: -40ºC
|
Ø cable aplication
|
|
Mounting of recomended cable ties for references 2002, 2151 and 2152
|
Widths: 2,5 mm, 3,6 mm y 4,8 mm
|
EN 60695-11-5:2005
|
|
---|---|
Resistance to flame propagation
|
Non-flame propagation acc./ needle-flamme test method at 30 sec.
|
European Directive 2014/35/EU
|
|
---|---|
CE marking
|
Conformity with standard EN 60695-11-5:2005, EN 71-1 (paragraph. 4.7 and 4.8, with test sample of 1 mm) and EN 62275 (Label-holders and marker plate)
|
1. The label holder does not guarantee the protection of the labelling system being used.
2. The resistance of the marking pen ref. 1751 on marker plates can be affected by aggressive environmental conditions.
3. Except for new part numbers, which are under process of obtaining quality marks and approvals. See updated information of each part number on www.unex.net
4. All features marked are based on random tests of the material in the manufacture of our products. However, they only reflect the values accepted by the raw material manufacturers, which are provided only as information and guidance.