ГOCT P 61084-1:2007 (GOST R 61084-1:2007)
POCC ES.AM05.H09265
Raw material
|
|
---|---|
Service pole
|
Aluminium (See technical data for raw material).
|
Service pole socket box
|
U24X (See technical data for raw material).
|
Applications
|
|
---|---|
Applications
|
Indoor installations.
|
Silicone contents
|
|
---|---|
Silicone free
|
<0,01%
|
Directive 2011/65/EU
|
|
---|---|
RoHS II Compliant
|
Compliant.
|
EN 50085-2-4:2009
|
|
---|---|
Minimum storage and transport temperature
|
-45ºC
|
Minimum installation and application temperature
|
-5ºC
|
Maximum application temperature
|
+60ºC
|
Resistance against mechanical impacts during mounting and use
|
2 J at -5ºC
|
Resistance to flame propagation
|
Non-flame propagation.
|
Electrical continuity characteristic
|
With electrical continuity characteristic.
|
Electrical insulating characteristic
|
Without electrical insulating characteristic.
|
Protection degree assured by the enclosure
|
IP4X.
|
Retention of the system access cover
|
Cover removable only with the aid of a tool.
|
Electrically protective separation
|
With internal protective separation.
|
According to floor treatment
|
Service poles for wet-treatment of floor
|
According to resistance to vertical load applied through a small surface area
|
Not declared.
|
According to resistance to vertical load applied through a large surface area
|
Not declared.
|
Contraints concerning the number or configuration of assembled modules
|
No.
|
Whether non vertical mounting is allowed
|
No.
|
Whether the flexible component is not part of the enclosure
|
No.
|
Protection against mechanical damage
|
IK07
|
Rated Voltage
|
750 V
|
Linear impedance
|
2,82 10-8 Ohm/m
|
Fixing for apparatus mounting of socket outlets
|
Resistance to extraction of 81 N
|
EN 60695-2-11:2001
|
|
---|---|
Glow-wire test
|
Severity degree: 960ºC.
|
European Directive 2014/35/EU
|
|
---|---|
CE Marking
|
Conformity with standard EN 50085-2-4:2009.
|
1. Except for new part numbers, which are under process of obtaining quality marks and approvals. See updated information of each part number on www.unex.net
2. All features marked are based on random tests of the material in the manufacture of our products. However, they only reflect the values accepted by the raw material manufacturers, which are provided only as information and guidance.
3. Detection limit for the analytical technique applied.