BS EN 61537:2007 (IEC 61537:2006) International cable tray and cable ladder standard
|
|
---|---|
Min./max. transport, storage, installation and application temperature
|
-20 ºC up to +60 ºC.
|
Electrical characteristics
|
|
Resistance to flame propagation s/ EN 60695-11-2:2003(3)
|
Non flame propagating system.
|
Coating
|
Without coating.
|
Available dimensions [mm]
|
|
Safe working load - SWL- as trapeze support of cable tray 66
|
|
Safe working load - SWL- as trapeze support of cable ladder 67
|
|
Safe working load - SWL- as floor support of bandejas 66
|
|
Safe working load - SWL- as floor support of cable ladder 67
|
|
Glow-wire test acc./ IEC 60695-2-11:2001(3)
|
Severity degree 960ºC.
|
Safe working load - SWL- as wall support of cable tray 66 for vertical paths
|
|
Performance against corrosion (humid and saline)
|
Inherently resistant to corrosion and therefore do not require testing.
|
BS 6946:1988 Specification for Metal Channel Cable Support Systems for Electrical Installations
|
|
---|---|
Slip resistance - subclause. 8.1
|
Strut spring nut 60 mounted on insulating strut channel 60202-48 and 60204-48 : 18 kg (with 10 Nm torque moment)
|
Pull out resistance - subclause 8.2
|
Strut spring nut 60 mounted on insulating strut channel 60202-48 and 60204-48 : 76 kg (with 10 Nm torque moment)
|
EN 61914:2016 (IEC 61914:2015) International Cable Cleat standard
|
|
---|---|
Maximum lateral and axial load
|
|
Conformity with the demands of European Directive 2014/35/EU
|
|
---|---|
CE Marking
|
Insulating strut channel 60. Conformity with standard EN 61537:2007.
|
1. Detection limit for the analytical technique applied.
2. Except for new part numbers, which are under process of obtaining quality marks and approvals. See updated information of each part number on www.unex.net
3. Tested according to standard prescriptions of EN 61537:2007 . Equivalent to IEC 61537:2006 Cable tray and cable ladder standard.
4. Value corresponding to the last 5 years, subject to availability.
5. All features marked are based on random tests of the material in the manufacture of our products. However, they only reflect the values accepted by the raw material manufacturers, which are provided only as information and guidance.