Technical specification
Trunkings 93 in aluminium
Description
Use
- Internal lid,for mounting of switches and sockets in environments requiring nice finishing
- Unex trunkings are designed for their mounting on the wall or flush-mounted on brick walls or plasterboard, partitions, wooden linings,etc.
- Fixed division with independent covers and possible sub-divisions with dividers and socket boxes.
Design
- 2m length. Easy transportation.
- Perforated base every 250mm for a faster assembly.
- Colour: Aluminium RAL 9006
- Designed to fit in the most demanding architectural and decorative surroundings.
- The trunking rigidity absorbs the irregularities of the wall.
- Protective film. Ensures that the product remains in perfect conditions during transport and application.
Installation
- Fittings in two pieces offering the possibility to mount the most common switches and sockets assuring a solid fixing.
- Internal lid and fittings are pressured mounted. Removable only with the aid of a tool.
- Possibility of mounting corner-pieces which protect the data cables and allow you to keep the right bending radius.
- Earthing is required.
Mounting instructions
- To fulfil the characteristics defined herein, the installation must be carried out in accordance with the manufacturer`s assembly instructions provided in the main product packaging and are also available on the website www.unex.net.
Characteristics
|
Raw material
|
|
|---|---|
|
Trunkings
|
Aluminium (See technical data for raw material).
|
|
Fittings and accessories
|
U24X (See technical data for raw material).
|
|
Applications
|
|
|---|---|
|
Applications
|
Indoor installations.
|
|
Silicone contents
|
|
|---|---|
|
Silicone free
|
<0,01%
|
|
Directive 2011/65/EU
|
|
|---|---|
|
RoHS II Compliant
|
Compliant.
|
|
EN 50085-2-1:2006 + A1:2011
|
|
|---|---|
|
Minimum storage and transport temperature
|
-45ºC
|
|
Minimum installation and application temperature
|
-5ºC
|
|
Maximum application temperature
|
+60ºC
|
|
Resistance against mechanical impacts during mounting and use
|
|
|
Resistance to flame propagation
|
Non-flame propagation.
|
|
Electrical continuity characteristic
|
With electrical continuity characteristic.
|
|
Electrical insulating characteristic
|
Without electrical insulating characteristic.
|
|
Protection degree assured by the enclosure
|
|
|
Retention of the system access cover
|
Cover removable only with the aid of a tool.
|
|
Electrically protective separation
|
With internal protective separation.
|
|
Intended installation positions
|
|
|
Prevention of contact with liquids
|
Relying on manufacturer's instructions allowing all installation positions of the CTS and all positions of insulated conductors and live parts in CTS.
|
|
Type
|
Type 3.
|
|
Rated Voltage
|
750 V
|
|
Linear impedance
|
2,82 10-8 Ohm/m
|
|
Protection against mechanical damage
|
IK07
|
|
Fixing for apparatus mounting of socket outlets
|
Resistance to extraction of 81 N
|
|
EN 60695-2-11:2001
|
|
|---|---|
|
Glow-wire test
|
Severity degree: 960ºC.
|
Characteristics
Raw material
Trunkings:
Aluminium (See technical data for raw material).
Fittings and accessories:
U24X (See technical data for raw material).
Applications
Applications:
Indoor installations.
Silicone contents
Silicone free:
<0,01%
Directive 2011/65/EU
RoHS II Compliant:
Compliant.
EN 50085-2-1:2006 + A1:2011
Minimum storage and transport temperature:
-45ºC
Minimum installation and application temperature:
-5ºC
Maximum application temperature:
+60ºC
Resistance against mechanical impacts during mounting and use:
- Trunkings: 5 J at -5ºC.
- Fittings: 0,5 J at -5ºC.
Resistance to flame propagation:
Non-flame propagation.
Electrical continuity characteristic:
With electrical continuity characteristic.
Electrical insulating characteristic:
Without electrical insulating characteristic.
Protection degree assured by the enclosure:
- IP4X. Mounted on wall.
- IP3X. Angled RJ-45 faceplates.
Retention of the system access cover:
Cover removable only with the aid of a tool.
Electrically protective separation:
With internal protective separation.
Intended installation positions:
- Flush mounted on the wall.
- Semi flush or surface mounted on the wall.
- Wall fixed and supported by the floor.
- Wall fixed and supported by a horizontal surface other than the floor.
Prevention of contact with liquids:
Relying on manufacturer's instructions allowing all installation positions of the CTS and all positions of insulated conductors and live parts in CTS.
Type:
Type 3.
Rated Voltage:
750 V
Linear impedance:
2,82 10-8 Ohm/m
Protection against mechanical damage:
IK07
Fixing for apparatus mounting of socket outlets:
Resistance to extraction of 81 N
EN 60695-2-11:2001
Glow-wire test:
Severity degree: 960ºC.
Compulsory regulations
|
European Directive 2014/35/EU
|
|
|---|---|
|
CE Marking
|
Conformity with standard EN 50085-2-1:2006+A1:2011.
|
Compulsory regulations
European Directive 2014/35/EU
CE Marking:
Conformity with standard EN 50085-2-1:2006+A1:2011.
Characteristics of aluminium raw material
- Base raw material: Aluminium
- UL flammability tests on plastic materials according to ANSI/UL 94: 1990: Non-combustible (2)
- Coefficient of linear expansion: 0,02 mm/ºCm (2)
Characteristics of U24X raw material
- Base raw material: PVC.
- Silicone contents: <0,01%. (3)
- Phthalate contents according to ASTM D2124-99:2004: <0,01%. (3)
- Dielectric strength: Insulating.
- Reaction to fire s/UNE 201010:2015: Classification: M1
- UL flammability tests on plastic materials according to ANSI/UL 94: 1990: Degree UL94: V0.
- Coefficient of linear expansion: 0,07 mm/°C m. (2)
Notes
1. Except for new part numbers, which are under process of obtaining quality marks and approvals. See updated information of each part number on www.unex.net
2. All features marked are based on random tests of the material in the manufacture of our products. However, they only reflect the values accepted by the raw material manufacturers, which are provided only as information and guidance.
3. Detection limit for the analytical technique applied.
23/07/2025 16:25:04
Our quality management system complies with the requirements of UNE-EN ISO ISO 9001:2015 for the design, production and commercialization of Unex Systems.
+34 619 715 627Our quality management system complies with the requirements of UNE-EN ISO ISO 9001:2015 for the design, production and commercialization of Unex Systems.
+34 619 715 627