Technical specification
Cable tie wall plug (flush) 25 in 
Description
Use
- For tying of cables and conduits.
- Compatible with cable ties 22 width 3,6mm., 4,8mm. y 7,6mm in indoor and outdoor installations.
- It is recommended to keep the bag closed until use.
- Colour: Grey RAL 7035.
Installation
- Hand thread, easier mounting at site.
- For hard and soft walls. No screews needed.
- Only two pieces for each fixing.
- One size of cable ties for several cable or conduit diameters.
- Good resistance to extraction.
- Good outdoor performance and resistance to corrosion.
- Insulating material, halogen free.
Product characteristics
- Plug, grey colour for indoor installations: U64X
- RoHS Compliant: Conformity(1)
- Silicone contents: Silicone free (< 0,01%)
Quality Marks(2)
EN 62275:2019
Licence nº: 030/002292
EN 62275:2019
Licencia nº: NF004_1005/A3
EN 62275:2019
Licence nº:40012853
Characteristics
|
EN 62275:2019
|
|
|---|---|
|
Material
|
Non metallic
|
|
Temperatura mínima de montaje
|
-15ºC.
|
|
Temperatura mín./max. de instalación y aplicación
|
-40ºC a +60ºC
|
|
Resistencia UV
|
Not declared.
|
|
Declared mechanical strength
|
|
Characteristics
EN 62275:2019
Material:
Non metallic
Temperatura mínima de montaje:
-15ºC.
Temperatura mín./max. de instalación y aplicación:
-40ºC a +60ºC
Resistencia UV:
Not declared.
Declared mechanical strength:
- Ref. 1251-3: 4,0Kg
- Ref.1252-3: 3,4Kg
Compulsory regulations
|
Directiva de Baja Tensión 2014/35/EU
|
|
|---|---|
|
CE Marking
|
Conformidad con la norma EN 62275:2019.
|
Compulsory regulations
Directiva de Baja Tensión 2014/35/EU
CE Marking:
Conformidad con la norma EN 62275:2019.
Characteristics of U64X raw material
- Base raw material: Polyamide 6
- Halogen contents according to EN 50642: 2018: Halogen free
- Silicone contents: <0,01% (3)
- Phatalate contents according to ASTM D2124-99:2004: <0,01% (3)
- UL flammability tests on plastic materials according to ANSI/UL 94: 1990: degree UL94 HB
Notes
1. See updated information of each part number on www.unex.net
2. Except for new part numbers, which are under process of obtaining quality marks and approvals. See updated information of each part number on www.unex.net
3. Detection limit for the analytical technique applied.
04/11/2024
Our quality management system complies with the requirements of UNE-EN ISO ISO 9001:2015 for the design, production and commercialization of Unex Systems.
+34 619 715 627Our quality management system complies with the requirements of UNE-EN ISO ISO 9001:2015 for the design, production and commercialization of Unex Systems.
+34 619 715 627