Logo Unex
Fixings 26 DT in LMP

Technical specification

Fixings 26 DT in Logo

Logo Unex

Description

Use

  • Detectable fixings for tying of cable ties 22DT used in equipment and machinery in food processing, pharmaceutical and all industries exposed to contaminants, in which detection devices are commonly used.(1)

Detectability

  • Unex fixings 26 DT can be identified by metal detectors and x-ray inspection devices.
  • Installing Unex fixings 26DT helps to reduce the contamination risk of the final product and enables compliance with European Directive HACCP (Hazard Analysis Critical Control Points).
  • Colour: Blue, facilitates visual detection throughout the hole process, reducing the contamination risk.

Product characteristics

  • Raw material: U62X, isulating material, halogen free.
  • Directive 2011/65/EU: RoHS II Compliant

Characteristics

Fixings acc./ EN 62275:2015
Material
Non metallic
Service temperature
-40ºC to +85ºC
Minimum installation temperature
-30ºC
Static load
  • Ref. 1243DT: 45 N
  • Ref. 1254DT: 1 N
  • Ref. 1256DT: 2,5 N
  • Ref. 1257DT: 9,8 N
Recomended cable ties widths
Ref. 1243DT
Ref. 1254DT
Ref. 1256DT, 1257DT
  • 2,5 mm, 3,6 mm, 4,8 mm and 7,6 mm
  • 2,5 mm
  • 2,5 mm, 3,6 mm y 4,8 mm

Characteristics

Fixings acc./ EN 62275:2015

Material:
Non metallic
Service temperature:
-40ºC to +85ºC
Minimum installation temperature:
-30ºC
Static load:
  • Ref. 1243DT: 45 N
  • Ref. 1254DT: 1 N
  • Ref. 1256DT: 2,5 N
  • Ref. 1257DT: 9,8 N

Recomended cable ties widths

Ref. 1243DT
Ref. 1254DT
Ref. 1256DT, 1257DT:
  • 2,5 mm, 3,6 mm, 4,8 mm and 7,6 mm
  • 2,5 mm
  • 2,5 mm, 3,6 mm y 4,8 mm

Compulsory regulations

European Directive 2014/35/EU
CE Marking
Conformity with standard EN 62275:2015

Compulsory regulations

European Directive 2014/35/EU

CE Marking:
Conformity with standard EN 62275:2015

Characteristics of U62X raw material

  • Base raw material: Polyamide 6.6
  • Halogen contents according to EN 50642: 2018: Halogen free
  • Silicone contents: <0,01% (2)
  • Phatalate contents according to ASTM D2124-99:2004: <0,01% (2)
  • UL flammability tests on plastic materials according to ANSI/UL 94: 1990: degree UL94 HB
  • Behaviour to chemicals exposure: Resistant to the most common:
    - Hydroxides
    - Oils
    - Fats
    - Carbon hydrides
    - Acetone
    - Chlorated solvents
    The zinc of the galvanized affects the life utility of polyamide 6.6 in front of agressive agents (chemical agent and UVs). (3)

Notes

1. Fixings' detectability can be influenced by certain factors (type of analysed product, type and sensitivity of the detection device, inspection speed). It is recommended to carry out a detection test at several checkpoints.

2. Detection limit for the analytical technique applied.

3. All features marked are based on random tests of the material in the manufacture of our products. However, they only reflect the values accepted by the raw material manufacturers, which are provided only as information and guidance.

04/10/2024