BS EN 61537:2007 (IEC 61537:2006) International cable tray and cable ladder standard
|
|
---|---|
Min./max. transport, storage, installation and application temperature
|
-20 ºC up to +90 ºC.
|
Electrical characteristics
|
|
Resistance to flame propagation s/ EN 60695-11-2:2003(3)
|
Non flame propagating system.
|
Coating
|
Without coating.
|
Available dimensions [mm]
|
|
Safe working load - SWL- at 40ºC and 60ºC(4)
|
|
Safe working load - SWL- at 90ºC(4)
|
|
Safe working load - SWL- Test conditions
|
|
Glow-wire test acc./ IEC 60695-2-11:2001(3)
|
Severity degree 960ºC.
|
Performance against corrosion (humid and saline)
|
Inherently resistant to corrosion and therefore do not require testing.
|
Conformity with the demands of European Directive 2014/35/EU
|
|
---|---|
CE Marking
|
Insulating horizontal support 60. Conformity with standard EN 61537:2007.
|
1. Detection limit for the analytical technique applied.
2. Except for new part numbers, which are under process of obtaining quality marks and approvals. See updated information of each part number on www.unex.net
3. Tested according to standard prescriptions of EN 61537:2007 . Equivalent to IEC 61537:2006 Cable tray and cable ladder standard.
4. Use metal fixings of diameter 10 mm or diameter 8 mm depending on the kg of extraction. Pay attention to the diameter of the washer. (18 – 22 mm). A suitable fixing must be selected for the kg of extraction and that works in the type of wall where it is going to be installed.
5. Value corresponding to the last 5 years, subject to availability.
6. All features marked are based on random tests of the material in the manufacture of our products. However, they only reflect the values accepted by the raw material manufacturers, which are provided only as information and guidance.